If you want to get the correct size, you need to count 3 rivets on the chain and measure the distance between them from the centre points. Three rivets that measure 12 an inch across divided by two will give you a pitch of 1.5 inches.
If you are unsure of the size of your chain, you can measure it with a tape measure. If it is too big, cut it in half and re-measure.
Table of Contents
Are chainsaw chains different?
Chainsaw chains come in three main varieties. The full chisel, semi chisel and low profile chains are used for different tasks. The chisel refers to how the teeth are cast on the chain itself, which determines how the chain cuts through the wood. Semi chisels are the most common type of chainsaw chain, and are used to cut through hardwoods such as oak, maple, cherry and walnut.
The semi-chisel is the least common of the three and is used primarily for sawing through softwoods. It is also used as a saw for cutting through wood that is too thick to be cut with a regular saw. Low-profile chainsaws are also available, but they are not as common as the other two types.
Can you use a Husqvarna chain on a Stihl chainsaw?
The first time Husqvarna chains were used on saws was in 1995. According to a general answer, the chains can go on a chainsaw. The two chainsaw brands use different chains, so they can’t fit on the same chainsaw.
Can you use an Oregon chain on a Stihl chainsaw?
Oregon r55 advance cut chainsaw chain for 16-inch bar -55 drive links is a low kickback chain that fits several models. This product can only be purchased through retailers or servicing dealers. This chain is designed to be used with a 16 inch bar and is designed to fit most chainsaw models.
What is skip tooth chain used for?
Skip or semi-skip chain has a further reduction in the number of teeth and is used for applications where a lot of debris is produced, such as ripping or cross-cutting. The teeth of the chain are arranged in a series of concentric rings, each ring having one or more teeth. The teeth are spaced apart from each other by a distance equal to the distance between the rings.
Each tooth of a chain is connected to a corresponding tooth on the other chain. When the two chains are joined together, the teeth on one chain will be in contact with the adjacent teeth, and when they are separated, they will have no contact at all. In this way, a single chain can be used in many different applications.
What is the difference between R56 and S56 chainsaw chain?
The width of the chain track is not the same.
Can you use any brand chainsaw chain?
Not every bar and chain will fit on your machine, and chainsaw blades are not universal. The correct specification is needed for the chainsaw chains to fit on your bar. It will not fit if you have a chain that is too long or narrow. Mixing brands of chains is no problem as long as they are of the same specification.
The length of your chain should be measured from the end of one end to the other end. For example, if you are using a 12 inch chain, you should measure 12 inches from end 1 to end 2. You should also measure the distance between the two ends of each chain. This will give you the chain’s length in inches.
What chains can I use on a Stihl chainsaw?
Chains, as well as chain saws, are manufactured by the company. After-market manufacturers can produce similar chains that may be used on a variety of brands of chains.
