It’s not safe to clean hardwood floors with bleach because bleach can break down the wood’s finish and cause discoloration. The long answer, however, is that it depends on the type of floor you’re cleaning and how much bleach you use. If you want to keep your floors looking their best, it’s best to use a high-quality floor cleaner that contains no bleach.
Table of Contents
What happens if you use bleach on wood?
The use of bleach can cause several types of discolorations on both bare and finished wood. If the wood is bare, any discolorations that may appear can usually be corrected with either a chemical or physical method. Chemically, the most common method is to use a solution of sodium hydroxide (NaOH) and water.
The solution should be diluted to a ratio of 1 part NaOH to 10 parts water, and should not be allowed to stand for more than a few minutes. After the solution has been thoroughly diluted, it should then be rinsed with clean water to remove any remaining solution.
It is important to note that this method should only be used on bare wood that has not been treated with any type of stain or varnish, as it will not remove the stain from the finished product.
In addition, if you are using the chemical method, you will need to be sure that the water is not contaminated with other chemicals, such as ammonia, which can be harmful to the health of woodworkers and the environment. For more information on this process, please see our article on How to Remove Stains and Varnishes from Wood.
What’s the best thing to clean wood floors?
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. You can make your own cleaner by mixing 10 parts warm water with one part vinegar. Put a few drops of liquid soap in the mixture and let it sit for a couple of minutes. If you’re not sure what type of wood you have, you can ask a friend or family member to look it up on the Internet.
Can I use Clorox to clean wood floors?
You can also use Clorox® Bleach to disinfect hardwood floors. bleach should never be used in full strength. Follow the instructions on the bottle if you put it in water. You can learn about cleaning and sterilizing floors with bleach.
What disinfectant is safe for hardwood floors?
It’s possible to clean polished wood or non-porous hardwood floors with lysol®. If you’re just looking to – you can use Lysol® All-Purpose Cleaner to clean and disinfect your floor surface without causing damage.
How do you disinfect hardwood floors without damaging them?
If you make your own path, the ratio is 1 cup white vinegar to 10 cups water. The neutral base will not leave any damage. Store-bought cleaners can be effective if they’re also free of harmful chemicals.
Can I use Pine-Sol on wood floors?
Pine-Sol is safe to use on wood floors in small, diluted amounts. It is important to check the label for the dilution ratio before putting it on the floor. Dry mopping is the best method for cleaning because of the minimal amount of water and Pine-Sol mixture.
