To score the surface when cutting vinyl plank, use a straight edge and a utility knife. The score is at the line. The under pad on the bottom of the plank needs to be back-cut. If you have difficulty using this method, you can use a jig saw, circular saw or hand saw. . This will be used as a backing for the underside of your vinyl.
The backing will act as an insulator and will help keep the vinyl from getting too hot during the cutting process. It is important that the backing is not too thin or too thick, as this will affect the sound quality. I like to use about 2/3 of an inch of backing, but you may need more or less depending on how thick or thin you want your backing to be.
Make sure that you do not cut too close to the edge or you will not be able to get a good cut. Use a sharp knife or jigsaw to make the cuts. Be sure to keep your knife sharp and clean, otherwise you could cut yourself or damage your cutting board.
Table of Contents
Can you use a utility knife to cut vinyl flooring?
Knife with 3 standard utility and hook blades is designed specifically for cutting carpet, carpets, upholstery, and other hard-to-reach areas of your home. The blade is made of high-carbon stainless steel and the handle is constructed of a durable plastic. This multi-purpose utility knife is ideal for use in a variety of applications, including: cutting, trimming, filing, sanding, polishing, painting and more.
How do you cut vinyl planks without chipping them?
The key to cutting through the flooring is to use a tooth blade. Some recommend at least 18 teeth per inch on a hand saw to prevent chipping, whilst others recommend at least 30 teeth per 1/2 inch.
If you are using a table saw, you will need to make sure that the blade is sharp enough to cut through the wood. You can also use sandpaper to smooth out any rough edges that may be present on the surface.
Do you have to cut the tongue of the first row of vinyl plank flooring?
We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. The second plank should be inserted into the first at an angle pressing the short ends together. The same procedure can be done on the other side of the plank.
Repeat steps 2 and 3 for the next two rows. This time, insert the third plank in the middle of each row, pressing down on the long ends. Continue this process until you have completed the entire row.
What is the best tool to cut vinyl?
A utility knife is the best tool for cutting vinyl siding when you’re making longitudinal cuts along the length of a plank. It’s best to use a hand saw or tin snips if you’re only making a few vertical cuts. The sander is one of the vinyl siding cutting tools.
Can you cut vinyl by hand?
You can cut vinyl with a pair of scissors or a knife. One of the projects my kids and I did together was to cut out a picture frame for our living room wall.
Which side of vinyl plank goes against the wall?
As you start to move your tongue up and down, you want to place the tongue against the wall. Once you are comfortable with this position, you can move on to the next position.
