For a medium shade, it is recommended to use 1 pound wax. If you want a dark shade, 1/2 to 1 pound of wax should be enough. Wax can be used in a variety of ways, but the most common is to apply it directly to the skin.
This is the easiest way to use wax, as it is easy to work with and doesn’t require any special tools or equipment. Wax can also be applied to hair, nails, or any other part of the body that needs to be protected from the elements.
Table of Contents
How much pigment do you add to wax?
A small amount of mica can go a long way. We recommend starting with a much smaller amount and working your way up, since you can add up to 1 tsp of mica per pound of wax.
If you add too much mica, it can be difficult for the powder to be evenly dispersed in the wax, and the excess can sink to the bottom of the jar. Also, be sure to use a jar that is at least 1/2-inch in diameter. This will ensure that you have enough room to work with.
How much dye do I need for a 12 oz candle?
In order to get a true red, you need 16 drops of red, 2 drops of green, and 1 drop of blue in 12 ounces of wax. If you are using a different wax, you will need to adjust the number of drops per ounce.
How do you calculate candle dye?
You will need to use 0.05% dye for a medium shade of red, blue, yellow, etc. 2000 pounds of wax requires 1 pound of liquid dye. This is equivalent to using about 7 or 8 drops of dye per candle, since most of you make candles on a much smaller scale.
If you want to make a larger quantity of candles, you can use more dye, but it will take longer to dry. If you are making more than a few candles at a time, it may be a good idea to do a test run to see how much dye you need.
You can do this by putting a small amount of the dye in a cup of water and letting it soak for a minute or two. Then pour the water back into the cup and repeat the process until you have used all of your dye and are satisfied with the color.
Can you use food coloring to dye candle wax?
Liquid food coloring won’t work because it is water based and won’t mix with the oils in the wax. Gel or paste food color can be used in place of the water-based coloring.
Can you add pigment to wax?
Using a palette knife or butter knife, mix wax with pigment in a small dish until completely combined, (adjust the wax to pigment ratio depending upon the transaprency desired).
It is important to work the wax into any grooves or pits of the paint by applying with a lint-free cloth or soft steel wool. Allow to dry completely before applying the next coat.
If desired, apply a second coat of wax over the first coat to seal the surface.
