It is relatively easy to calculate how much you need to fill an area with bark because it is sold by volume. Measure the length, width and depth of the area, then add the three figures together to give you the amount of bark you will need.
Table of Contents
How do you measure for landscape bark?
The area is an inch deep and covered by one yard of material. So, to determine your total, multiply your square footage by the depth in inches desired, then divide by 324. square footage x desired depth x total square feet.
For example, if you want to build a two-bedroom, one-bathroom home with a total of 1,000 square feet of living space, you’ll need to add a cubic foot of concrete to your project. To do this, simply multiply the number of cubic yards you need by 2, and divide that number by your desired square footage.
What area will 50 Litres of bark cover?
A 50l bag of wood bark chips will cover an area of about 2 square metres at a depth of 25mm or 2.5 cm. It will cover an area of approximately 1 square metres if it is laid at a depth of 50mm or 5 cm. If you wish to cover a larger area, you will need to purchase more wood chips.
What area would 70 Litres of bark cover?
containers. 70L bag is easy to carry around the garden, and should give a coverage of 1 square metres to a depth of 2 metres. Mulch is available in a wide range of sizes, from 1.5 litres to 70 litres.
How thick should bark mulch be?
A 3- to 4-inch layer of wood chips or shredded bark is appropriate for well-drained sites around trees. A 2- to 3-inch layer is appropriate on heavy soils. mulch should not be placed against the trunks of trees.
If the soil is too dry, you may need to add a layer of sand or gravel to the bottom of the container. This will help to retain moisture and prevent evaporation. You can also use a small amount of compost or other organic material to help keep soil moisture in check.
