How To Avoid Orange Peel When Painting? Finally Understand!

how to avoid orange peel when painting

The result of an improper painting technique is orange peel. It is caused by the quick evaporation of thinner, incorrect spray gun setup, spraying the paint at an angle other than the direction of the air flow, or spraying too much paint.

The thickness of your paint depends on several factors, including the type of paint you are using, the amount of time it has been exposed to air, and the temperature at which it was applied. For example, thinner paint will have a lower viscosity than thicker paint, which means it will take longer to evaporate from the nozzle.

If you have thin paint on your nozzle, you may need to use a thicker nozzle to achieve the same thickness as you would if you had a thick paint sprayer.

Watch the video below for in-depth answer

How do you get rid of orange peel in paint?

The best way to remove orange peel without sanding is to use fast cutting compound. Cutting compound is an abrasive paste that will erode an extremely thin layer of paint and wear away the orange peel in the process. Pick up some fast cutting compound at a local store. You can also buy it online at

How do you keep orange peel from primer?

Orange peel is usually a result of spraying on too thick of a film with the newer water-based materials. Try spraying an extremely THIN FILM, but still WET coat. A dry coat is when the film is completely dry, while a wet coat is when the film is wet.

Do you sand orange peel texture before painting?

You can’t just jump right in and apply your texture on virgin drywall—it needs to be sanded, cleaned, and primed in order to get the texture to stick in a way that’s smooth and free of imperfections.

Is orange peel normal on a paint job?

Most new cars finish with a small amount of orange peel. Orange peel is the result of how the painter applied the paint and the environment in which the paint dried, and while it’s factory-correct, it does tend to diminish some of the car’s beauty.

Can orange peel be sanded out?

Wet-sanding (or “color sanding” if you’re old school) is the recommend way to eliminate deep defects, orange peel, or painting defects from a painted surface. The method will ensure a more constant finish and is safer for the environment. “Sanding is a process that uses abrasive sandpaper to remove paint from the surface of a piece of wood or metal.

The abrasives used in this process will leave a surface that is smooth, even, and free of surface imperfections. It is important to note that this is not the same thing as a paint stripper, which is used to strip paint off of metal or wood. Sanding will not remove all of the paint, but it will reduce the amount of paint that can be removed by the process.

What color primer should I use for orange paint?

Use a dark gray primer. Gray is the perfect base for any red-toned paints, and it will cut down the number of coats you’ll need to achieve the same effect. If you’re looking for something a little more subtle, you can use a lighter shade of red, such as a dark brown or black.

You can also use lighter shades of blue, green, yellow, orange, or purple, depending on the color scheme you are going for. If you don’t have a ton of time to work on your reds, try mixing a few shades together to see what works best for you.

Rate this post
You May Also Like