Staple sheets or other fabric to the floor joists overhead, allowing them to billow down in tufts. While hiding the mess above, this technique softened the space. Colorful parachutes or balloons can be hung from the rafters for a more dramatic effect.
Table of Contents
What is the cheapest way to cover a ceiling?
Glue-on or staple-on ceilings are an affordable option that is easy to install. They can be attached directly to the existing ceiling or onto furring strips. You can also use them to attach a ceiling fan to a wall.
Fiberglass ceiling fans are a great option if you don’t want to spend a lot of money on a new ceiling, but you still want something that will last a long time.
Fiberglass fans come in a variety of styles and sizes, and you can choose from a wide range of materials, including wood, fiberglass, plastic, metal, glass and more.
How do you enclose a basement ceiling?
If you don’t have obstructions hanging below your joists, you easily can finish your basement ceiling using drywall or paneling, such as 4-by-8-foot sheets of decorative grooved wall paneling. You’ll have to figure out what to do with the seams at the end of the panels, which can be tricky, but sheet paneling is easy to install.
Can I use fabric to cover basement ceiling?
A white cloth is an easy way to add a classy finish to an unfinished basement ceiling. If you want to change the look of the basement, you can remove cloth fabric from the tin ceiling. Cut a piece of fabric to the size you need. I used a 1-inch wide strip of white fabric, but you can use any fabric you’d like.
You’ll need to cut the fabric so that it’s about 1/2 inch wide and 3/4 inch tall. If you don’t have a measuring tape handy, use a ruler to measure the width and height of the wall you’re going to use for your fabric.
The fabric should be long enough to cover the entire length of your wall, and it should also be thick enough that you won’t be able to see through it. For this project, I cut my fabric about 3 feet long and 1 foot wide, so I ended up with a 2-foot-wide strip that was about 2 inches wide by 3 inches tall, which was perfect for my project.
Should I cover basement ceiling?
Faced insulation is actually recommended on basement ceilings and ceilings in general. The face of the insulation protects it from falling out and entering the basement air. If the insulation is made of fiberglass, it can be harmful if it is exposed to humidity. Fiberglass insulation can also be used to insulate walls, ceilings, and floors. Fiberglass is a very strong and durable material, but it can be very difficult to install and maintain.
It is also very expensive, especially if you want to use it on a large scale. If you are looking for a more affordable option, you can use insulation that has been pre-insulated with a plastic sheeting, such as polyethylene, polypropylene, or polyurethane. These types of insulations are very durable and can last for many years.
How can I cover my basement ceiling cheaply?
It’s possible to cover an exposed ceiling with thin wood panelling. Fir plywood, hardboard, even oriented-strand-board (OSB), are even more affordable, but these less expensive options typically require paint, which can be expensive and time-Consuming. If you don’t want to spend the time and money to paint your walls, you can also use wood-framed panels.
These panels are made from a single piece of wood that’s glued to the wall. They’re typically less expensive than OSB panels, as well as less likely to require painting. However, they’re not as strong as OSBs, so you’ll need to be careful when installing them.
Can you drywall a basement ceiling?
If you want to save money in the long run, finishing your basement is the best way to do it.
