Use every other stud in the wall to install cup hooks close to the ceiling. Take a long piece of fabric and lay it on top of the cup hooks. Pull at the bottom of the fabric between the hooks to get it to fall in a straight line. Attach the hooks to your ceiling joists.
Use the same method as in Step 3, but instead of using fabric, you will need to use nails or screws to fasten your hooks onto the joist. If you are using screws, make sure they are long enough to reach all the way through the hole in your wall. Make sure the screws are tight enough that they do not slip out of their holes when you tighten them.
Table of Contents
What material is used for draping?
Voile can be made from cotton, silk, nylon, and other fabrics. Voile can be made in a variety of ways. The most common method is to cut a slit in the fabric and sew the slit to the back of the drape. This method works well if you want to make a simple, one-size-fits-all curtain.
However, it is not the most practical way to create a curtain that will work for a wide range of applications. For this reason, many designers prefer to use a more sophisticated method of making a voilé. In this method, you cut two pieces of fabric that are about the same width and length, then sew them together to form a single piece.
You can then use this single fabric as the base for your voille.
What will hold fabric to wall?
Hang the fabric on the wall using masking tape after washing and drying it. If you want to stick it to the wall, add liquid starch beneath and above the fabric. Use a utility knife to cut away the excess and enjoy your masterpiece.
What fabric is used for wedding draping?
In decorating outdoor wedding arches, the most common fabric used is chiffon, organza, netting, tulle, satin, lace, and silk. Other types of fabrics could be used, but these seem to be the most popular.
How do you attach fabric to a wall without damaging it?
You can use starch to attach the fabric to the wall. The fabric can be easily removed when you are done with this method. If you want to make your own wall, you will need to cut a piece of 1/4 inch plywood.
