If no cutter is available, you can use a hacksaw. It’s important to use a blade with a high teeth-per-inch count to clean a cut. Unless the wire has been pre-drilled, it is difficult to use a hacksaw to cut it.
If you’re cutting wire that has already been cut, you’ll need a wire stripper or wire cutter to remove the excess wire. If you don’t have one of these tools on hand, it’s a good idea to get one from your local hardware store.
Table of Contents
Can scissors cut through barbed wire?
It’s best to use a wire cutter or plier hand tool instead of using scissors or a blade. Even a sharp pair of scissors may not cut through wire without damaging it. If the wire is too thick, you may need to cut it with a hacksaw or similar tool. You can also use wire cutters or wire strippers to remove the excess wire.
What tool do I need to cut fencing wire?
It is easier to carry a pair of small bolt cutters with you if you need to cut a lot of wire. They’re small enough to fit in your pocket, but have a long, sharp blade that’s perfect for cutting wire, like the knipex fencing cutters.
Can I use scissors instead of wire cutters?
We will talk about when they can and can’t be interchanged. Most of the time, you shouldn’t use scissors instead of wire cutters. A wire cutter is an inexpensive way to cut metal wires. You can use scissors to cut through wire in some cases.
For example, if you want to cut a wire that is too long to be cut with scissors, then you may need to use wire strippers. Wire stripper is a tool that can be used to remove the wire from a cable. It is also known as a crimper, crimp, or crimping tool.
The wire is pulled apart in a straight line from the center of the cable to the end of it. This is the easiest way to get rid of wires that are longer than a few inches. You can also use this tool to separate wires from each other, which is useful when you are trying to figure out which wires are connected to which other wires in your system.
Crimpers are a type of tool used for separating wires and connecting them together.
Can you cut wire with tin snips?
Tin snips have sharp blades with 8-inch handles. They are designed to cut sheets of thin metal, but can also be used to cut copper, brass, aluminum, and other metals. The tin snip is a very versatile tool.
Can fencing pliers cut barbed wire?
Most high quality fencing pliers will be able to cut through barbed wire. However, if the wire is thicker than 1/8″ thick, you may need to use a larger plier to get the job done.
Can bolt cutters cut cable?
Bolt cutter can cut through 5/8-in., vinyl-coated, flexible, braided, steel cable in 60 seconds. The cable took a bit longer than solid chain because it didn’t sever all the way through the cable, but it was still quick and easy.
Rated 5 out of 5 by HomeDepotCustomer from This is a great tool to have in your toolbox. I have used it to cut a few lengths of 1/2″ PVC pipe. It is very easy to use and works great.
