How To Cut Down A Tree Without A Chainsaw? Complete Explanation

how to cut down a tree without a chainsaw

You can cut a third of the way through the branch by using your handsaw. Continue cutting until the branch falls off when you switch to the other side.

It’s the same as using a pole saw to reach limbs over your head, just use the saw at the end of the branch. If you don’t have access to a saw, you can use a pair of pliers to hold the branches in place while you cut them.

Recommended video below

How do you cut a tall tree by yourself?

Use a chainsaw to make the first cut low in the trunk and parallel to the ground. The cut should reach about one-quarter to one-third of the way through the tree trunk. Remove a wedge of wood from the bottom of each cut by making a diagonal cut at a 45 degree angle above or below the initial cut.

Cut the second cut to a depth of about two-thirds to three-quarters of an inch. Use the same method to cut the third cut as described in Step 2, except that you will use a chain saw instead of a hand saw.

You will also need to remove a small amount of bark to allow the saw blade to penetrate the bark. The bark should be removed with a pair of tweezers or a utility knife. Be careful not to damage the wood, as this will affect the strength and durability of your tree.

Can I cut down a tree myself?

I safely cut down a small tree? If the tree is small enough that you could remove it without climbing a ladder, it’s likely OK if you remove it yourself.

If you have doubts about whether it’s safe to remove the tree on your own, you can contact an arboriculturalist. The first thing you should do is call your local fire department. You can also call the National Tree Service at 1-800-THE-TREE or visit their website at

How do you easily cut down a tree?

Start cutting branches at the lower end of the trunk after the tree has been felled. Stand on the uphill side of the tree whenever possible. You can work from the left side of the trunk until you reach the branch you want to cut.

After you’ve cut the branches to size, it’s time to trim them back to their original size. If you’re trimming too many branches at once, you may need to use a pair of pliers to help you get the job done.

What simple machine cuts down trees?

Workers use an axe or a saw to cut down the tree. They could use a chain saw. A crane made of levers and pulleys is used to raise the trunk. The tree is then cut into pieces, and the pieces are stacked on top of each other.

The pieces can be stacked in any order, as long as they are not too close together. Workers then use chainsaws or saws to cut the wood into smaller pieces and stack them in the correct order. This process is repeated until all the trees have been cut and stacked.

Is it cheaper to cut your own tree?

If you cut your own Christmas trees, they will cost less. Remember, if you get a pre-cut tree at a temporary lot, you’re also paying for transportation costs and the time it takes to cut the tree.

If you don’t cut your tree yourself, it’s a good idea to have someone else cut it for you. If you can’t find someone to do the job, ask a friend or family member to help. You can also hire a tree trimming company to trim your trees for a small fee.

You May Also Like