Cutting from the underside of a branch requires you to cut with the top of the bar. The saw pushes towards you, which is unnerving at first. As long as you follow these steps, it’s safe. Position your bar on a flat surface, such as a bench or table, and hold it with both hands. With your right hand, grasp the handle of your saw with your left hand and pull it up toward your body.
The handle should be parallel to the ground. If you don’t have a saw, you can use a pair of pliers to hold the blade in place while you do this. You’ll need to be careful not to pull too hard, or you’ll cut yourself on the way down! As you pull up, make sure to keep your back straight and your arms straight.
Don’t lean forward or backward, as this will make it harder to get a good cut. Keep your head up and look straight ahead. When you reach the bottom, your blade will be at a 45-degree angle, which is the angle at which it will cut the branch.
Table of Contents
How do you not pinch a chainsaw?
If you want to stop your chainsaw from getting stuck, make a cut on top of the log or tree that is at least one-third of the log’s diameter. Once you meet the initial top cut, use your chainsaw to cut from the underside.
Stand on the side to make sure you don’t cut into the tree’s bark. Once you’ve made your first cut, you’ll need to repeat the process for the rest of your logs. You’ll also want to keep a sharp knife handy so that you can cut through the bark with ease.
What is the most common chainsaw injury?
Kickback, pushback, and pull-in are the most common injuries associated with chainsaws. The greatest hazard is kickback. Kickback occurs when the saw is thrown back and forth because the rotating chain is stopped suddenly. Pushback can occur when a saw blade strikes a solid object, such as a wall or a fence post, causing it to rotate violently. The blade may also strike an object in the path of rotation, which can result in a loss of control.
Pull-ins are more common than kickbacks, but they can also occur. When a blade is pulled in, it causes the chainsaw to stop abruptly. However, if the blades are pulled out too quickly, they may not stop quickly enough to prevent a chain from being lost. If this happens, the operators may lose their balance and fall, injuring themselves or others.
Why chainsaw does not cut straight?
The right teeth on the chain are longer if the chain is cutting to the left. If the bar has worn unevenly, the chain will cut to one side or the other.
Why does my chainsaw jump when cutting?
You can extend the life of your chain, bar and chain saw motor by maintaining the proper amount of tension on the chain. The saw blades can jump the bar if you have too much slack in your chain. Throwing the chainsaw out of alignment is referred to as this.
If you have a chain tensioner, make sure it is set to the correct tension for your saw. Chain tensioners come in a wide variety of sizes and are designed to be used with chains of different lengths. You should always use the largest chain you can get your hands on to ensure that your chainsaws are properly tensioned.
How common are chainsaw injuries?
Approximately 36,000 people are injured by chainsaws annually according to the cdc. injuries. NSC estimates that the average annual cost of a person’s injury or death due to a power tool is about $1.2 million. In addition to medical costs, these costs include lost wages, property damage, lost productivity, and loss of enjoyment of life.
