When the top layer of wax has melted, simply hold the airflow over the candle and let it cool. If you don’t want to wait for the wax to melt, you can also use a heat gun to heat up a small amount of water in a saucepan.
Once the water is boiling, add the melted wax and stir until it’s completely melted. You can then remove the pan from the heat and allow it to cool for a few minutes before using it again.
Table of Contents
How do you reshape melted candles?
For reshaping a candle all you need to do is light the candle until the wax that you want to reshape is warm, but not really hot!!. When the wax is warm, you can model it, and when it cools down, you can re-shape it again.
You can use any type of wax you like, it doesn’t matter if it’s a clear wax or a dark colored wax. You can even use a mixture of clear and dark colors to make it look more realistic. Just make sure you don’t use too much of one color and too little of the other color, otherwise you’ll end up with a messy mess.
Why do my candles melt on one side?
If the wick in single wick candles is not well centered, it may cause the candle to burn unevenly. The flame will melt the wax on one side of your candle if it leans to one side. Push the wick with a knife until it is centered in the center.
Will candle tunneling fix itself?
If you leave a candle that tunnels by itself, sometimes it will correct and melt the remaining wax, but most of the time it won’t, leaving you with a ring of solid wax around the perimeter of the container. The harder it is to remove the wax, the longer you wait. The best way to do this is to place the candle in a bowl of water and let it soak for a few minutes.
When the water runs clear, pour it into a glass container and place it in the freezer for at least an hour. The wax will solidify and you can remove it with ease. If you don’t have a freezer, you may want to use an ice cube tray, which will allow you to pour the melted wax directly into your container without having to wait for it to melt.
How do you even out a candle?
If you have a heat gun or hair dryer, you can heat the wax on the top of the candle. You can use a toothpick to poke at the wax on the sides to help it melt faster. Continue heating until the top of the wax is completely melted.
This will take about 10-15 minutes, depending on how hot you’re heating it. Once it’s melted, remove from the heat and let it cool for a few minutes before using. The wax will harden quickly, so be careful not to burn yourself.
How do you fix a pooling candle?
You can fix a tunneled candle by wrapping a piece of aluminum foil around the edges and simply letting it burn. Make sure the foil hangs over the built up wax areas, but leave an opening in the center to burn the candle properly. The wax should melt and even out after a couple of hours. If it doesn’t, you’ll need to re-wax the candle.
Can I microwave my candle?
It is easy to do in a small space. It’s possible to use a microwave in your kitchen, even if you don’t have a microwave in your office. Microwaves are great for melting wax because they heat up quickly and don’t need to be re-heated. You can use them to melt wax on the stove top, in an oven, or even on a stovetop grill.
They’re also a great way to get wax out of the oven and onto the countertop. If you’re using wax to make candles, it’s a good idea to use wax that’s already melted. This way, you won’t have to wait for it to cool down before you use it.
How do you fix a tunneling foil candle?
A tunnelled candle can be fixed quickly with the help of aluminum foil. Simply wrap foil around the edge of the candle, leaving a hole in the middle so that the wick can burn through properly. The wax would have melted to an amber colour and the flame would be bright red after a couple of hours.
If you want to make your own, you can buy a sheet of foil from a craft store, cut it to the size you need and wrap it around your candle. You can also use a piece of paper towel to cover the hole, but it’s not necessary.
