You can fix a tunneled candle by wrapping a piece of aluminum foil around the edges and simply letting it burn. Make sure the foil hangs over the built up wax areas, but leave an opening in the center to burn the candle properly. The wax should melt and even out after a couple of hours. If it doesn’t, you’ll need to re-wax the candle.
Table of Contents
Can I fix candle tunneling with oven?
The good news is that you can rescue a slightly tunneled candle with this clever kitchen hack. Set your oven to 175°F, and pop the candle in for about five minutes. The temperature of the air should be warm enough to melt the wax, allowing the candle’s surface to level out again without burning.
Can candles be microwaved?
It is easy to do in a small space. It’s possible to use a microwave in your kitchen, even if you don’t have a microwave in your office. Microwaves are great for melting wax because they heat up quickly and don’t need to be re-heated. You can use them to melt wax on the stove top, in an oven, or even on a stovetop grill.
They’re also a great way to get wax out of the oven and onto the countertop. If you’re using wax to make candles, it’s a good idea to use wax that’s already melted. This way, you won’t have to wait for it to cool down before you use it.
How do you rescue tunnelled candles?
To get rid of that tunnel, fold a piece of aluminum foil in half and wrap it around the candle, folding it up so that it covers the top of the candle with space between it and the flame.
Place the folded foil on a flat surface and light it with a match or lighter. The flame should come up through the foil and out the other side. If it doesn’t, you may need to add more foil.
How do you fix a tunneling candle with foil?
Use aluminum foil to fix a candle that has started to tunnel Poke a hole in the middle at least an inch wide so that the flame gets enough oxygen to burn. The heat from the aluminum foil will melt the entire surface.
Remove the foil and place the melted wax in a glass jar or other container with a tight fitting lid. Place the lid on the jar and allow it to cool to room temperature before using.
How do you fix a tunneled candle without foil?
Using a heat gun (if you have one) or hair dryer on the highest setting, heat the wax on the top surface of the candle. You can use a toothpick to poke at the wax on the sides to help it melt faster. When the entire top surface of wax has melted, you can feel the heat on your hand. If you don’t have a thermometer, you’ll need to use your fingers to feel for the temperature.
If it’s too hot or too cold, it won’t melt. The wax should feel hot to the touch, but not hot enough to burn you. It should be about the same temperature as when you first put it in the oven. Once you’ve reached the desired temperature, let it cool to room temperature before using it again.
Why did my candle cave in?
They vary in size and depth, and have a direct effect on how your candle wick functions. Sinkholes occur naturally from the process of the wax setting up. As wax is heated to melt it into liquid form, it takes up more space as it changes form. This causes a sinkhole to form at the bottom of a candle.
When the candle is placed in the sink hole, it will not be able to heat up to the same temperature as the surrounding air. The candle will continue to burn at a lower temperature than it would have if it had been placed directly on the surface.
When this happens, a small amount of wax will be left behind, which can be used to fill the hole with more wax if you wish to do so. If you do not want to use this wax, you can simply leave it in place and wait for it to cool down before filling it back in.
