If you are having a drain backup in your basement, your wash tub basin, or laundry tub could be the culprit. It is possible to clean the strainer on the drain inlet yourself. You can try to force the water out of the trap by using a plunger.
If that doesn’t work, then you may need to use a water softener. If your drain is not draining properly, it could be due to a number of things, such as a leaky faucet, a broken water heater, an improperly installed drain plug, and/or a blocked drain pipe.
The best way to find out what is causing the problem is to call your local water company and ask them to send you a sample of your water for testing. This will give you an idea of the type of problem you have, as well as help you figure out how to fix it.
Table of Contents
What to do if sewage backs up in basement?
Call a restoration professional immediately if you have a sewage backup in the basement. You can be at risk of contracting diseases if you handle the water yourself. Water damage repair can be done with PuroClean.
Can I pour Drano down my basement drain?
Drano is safe to put down most drains. You will need to use another bottle if one bottle does not clear the sewage backup. You can put it in the trash, but it will take a long time to get rid of it. The best thing to do is to take it to a recycling center, where you can pick it up for free.
Can you pour Drano in main sewer line?
It’s not a good idea to put Drano or a similar product in the toilet because it contains chemicals that can be harmful to your health. However, if you have a sewer clog in your toilet, you can use an enzyme-based drain cleaner to get rid of it. 1 gallon of water 1/2 cup of baking soda (or 1/4 cup baking powder, or 1 teaspoon of vinegar or lemon juice) 1.
Put the water in a large pot and bring it to a boil. Once it’s boiling, reduce the heat to medium-low and let it simmer for about 10 minutes. Remove the pot from the stove and allow it cool down. Add the soda to the hot water and stir until it dissolves. Pour the solution into a clean container. Let it sit for at least 24 hours before using.
Rinse your hands with warm water to remove any residue. Use a paper towel to wipe off the excess solution. If you don’t want to use a solution, just pour it out of the container and rinse it off with clean water.
How do I unclog my main basement drain?
A minor obstruction should be cleared with a few strong pumps. Go for it if you put the plunger cup in the drain opening. The plunger did not do the trick. If you want to chase baking soda down the drain, try pouring it down. You’ll be surprised at how much more effective it is than a clogged drain.
What causes sewage backup?
A sewer backup is one of the worst nightmares a homeowner can have. Sewage backups occur when the sewage system gets overload and waste is pushed backwards through the line and back into the home. In the basement, backups can be found, but they can also be found in the crawl spaces.
Sewer backups can be caused by a number of factors, such as a leaky pipe, a broken pipe or a blockage in a sewer pipe. If you suspect that your sewer is clogged or blocked, you should call your local water and sewer company to see if they have a backup plan in place.
You may also want to check with your landlord to make sure he or she is aware of the problem.
How long does it take to unclog a main line?
The lining of your sewer pipes is destroyed by acid in these drains. Smart homeowners choose professional drain cleaners to restore their pipes quickly. A couple of hours is all it takes to clean the drain. The cleaning company will finish the task in less than an hour.
