Glue-on tiles are an easy way to make your basement ceiling. These tiles are usually made of polystyrene or fiberboard and come in a variety of colors, sizes, and styles. To glue them to the foundation, you’ll need to install plywood. Glueing them in place is all it takes after that.
Table of Contents
How do you finish an unfinished basement ceiling?
If you don’t have obstructions hanging below your joists, you easily can finish your basement ceiling using drywall or paneling, such as 4-by-8-foot sheets of decorative grooved wall paneling. You’ll have to figure out what to do with the seams at the end of the panels, which can be tricky, but sheet paneling is easy to install.
Does a basement ceiling need insulation?
Faced insulation is actually recommended on basement ceilings and ceilings in general. The face of the insulation protects it from falling out and entering the basement air. If the insulation is made of fiberglass, it can be harmful if it is exposed to humidity. Facing insulation can also be used to insulate the walls of a crawlspace or crawl space under a basement floor.
In this case, you will want to cover the entire floor with insulation, not just a portion of it. For example, if you have a 1/2-inch-thick layer of insulation on the floor, then you should cover all of that with 1-1/4 inches of facing insulation. If you are insulating only a small area, such as a closet or bathroom, it may not be necessary to do this. However, for larger areas, this is a good practice to follow.
Should you drywall basement ceiling?
If you want to get a simple and versatile finish, you should drywall your basement ceiling. The ceiling becomes pleasing immediately. You need to be careful with the existing ductwork, pipes, and electrical wiring before placing the drywall. Drywalling your ceiling is easy. All you need to do is drill a hole in the ceiling and install a 1/4-inch-thick sheet of plywood over the hole. You can also use a drill press to make the holes.
If you don’t have access to a press, then you can use an electric drill to drill holes for you. Once you’ve drilled your holes, it’s time to place the sheeting on top of them. It’s best to use the same type of sheet that you used for the flooring, because it will be easier to clean up later.
What is the cheapest way to finish a ceiling?
Install an array of 1-by-2-inch furring strips on the existing ceiling and nail tiles or planks to the strips. Furring strips are about $1 per square foot. Build a new ceiling. If the ceiling is made of solid wood, the cost can be as much as $4,400.
What size should ceiling joists be?
Depending on the height of the ceiling, the range of joist sizes can be as small as 2 by 4 inches and as large as 8 by 8 inches. If you are unsure of your ceiling height, it is best to consult with an architect or contractor to determine the best size board for your home. Ceiling height is the distance from the floor to the top of a wall.
It is measured in feet and is usually expressed in inches or inches per foot. Ceilings are typically measured from floor level to ceiling level. In some cases, ceiling heights can be expressed as a percentage of floor height. This means that if a ceiling is 12 inches high, then it would be 12/12ths of an inch high.
How far apart should ceiling joists be?
The standard spacing between the joists is 16 to 24 inches, depending on the size of the joist. If you want to add a second stud, you’ll need to drill a new hole in the wall.
You can do this by using a stud finder, or you can drill the hole yourself. If you use a drill press, make sure the drill bit is at least 1/4-inch larger than the diameter of your wall stud.
Should I insulate unfinished basement ceiling?
Yes—in most cases insulating your basement is a good idea because it will pay dividends down the road. Not only does wall insulation help keep your home warmer but it may also help prevent mold and mildew from growing in your house.
If you have a basement that is not insulated, you may want to consider adding a layer of insulation to it. Insulation can be purchased at any home improvement store, or you can make your own at home. If you don’t have the time or money to do it yourself, consider hiring an electrician to install it for you.
Can you use wood paneling for basement ceiling?
Flexible wood paneling is a great way to cover curved surfaces like archways. One advantage of using this material on your basement ceiling is that you can attach the panels right to the basement’s support beams without taking a lot of space away from the rest of the ceiling. The panels are also easy to install, and they come in a variety of colors to match your home’s décor.
How much does it cost to put a ceiling in a basement?
The cost of raising the basement can vary greatly depending on the size of the home. For example, a two-bedroom home can cost as much as $50,500 to raise. However, if you have a larger home, you may be able to save a lot of money by using a contractor to do the work for you.
