Yes, and that’s one of the questions we hear most often. Most homes in Florida don’t have basements because the concrete is slab-on-grade, meaning no basement floors and no walls. The slab needs to be dry and free of debris. LVP is made up of two layers: a concrete slab and a layer of plywood on top of it.
Plywood is the most common type of wood used in the construction industry, but it’s not the only one. You can also use a variety of other wood species, such as cedar, maple, poplar, birch, beech, oak, walnut, redwood, etc. It’s important to choose the right wood for the job, because it will affect the strength and durability of your vinyl flooring.
For example, if you’re using a maple slab, you’ll want to make sure that the wood you choose is strong enough to support the weight of a vinyl tile floor. If you want a wood that is more flexible, like pine, then you can use that instead.
Table of Contents
Do I need underlayment for vinyl flooring on concrete?
The key to installing luxury vinyl over concrete is to ensure the floor is level and clean. Underlayment isn’t a necessity, but you might consider it to add noise reducing qualities or additional softness to the product. If the concrete is not level, you will have to level it with a leveler.
If you are installing a vinyl floor over a concrete floor, make sure the vinyl is installed on the same level as the existing concrete. Also, be sure to install vinyl in a manner that will not cause any damage to your existing flooring.
Do you need a vapor barrier for vinyl plank flooring on concrete?
Installation of vinyl floors under 4mm should be done over the subfloor. If you have areas on a concrete subfloor that have concerns about the amount of water in them, it is advisable to use a vapor barrier underlayment that won’t add more water to the floor.
If you are installing vinyl flooring, you will need to make sure that the vinyl is installed in the correct orientation. This can be difficult to do if you do not know the orientation of your vinyl.
For example, if your wall is 1.5 feet from your edge, then you would measure 1 foot from each side of that wall, which would give you a total of 4 feet. You would then divide that number by 4 to get the number of inches between the two walls.
Now, multiply that by the width of each wall and you can determine how many inches of vinyl you need for your installation.
What type of underlayment do you use for vinyl planks on concrete?
In vinyl plank flooring, rigid underlayment plywood is the most common type. Rigid plywood has a very high tensile strength and can be used in a wide variety of applications. It is also very easy to work with and is very durable. Flooring is a great choice for a number of reasons.
First, it is extremely durable and will last for many years. Second, the price is usually very reasonable. Finally, you don’t have to spend a lot of money to get a quality product.
How do you install luxury vinyl flooring over concrete?
Glued-down lvt involves covering the concrete on which the tiles are laid. The two glue methods are hard set and pressure sensitive. Pressure sensitive glue is used to apply pressure to the surface of the tile or plank, while hard set glue fixes the tiles firmly in place. This is the most common type of glue used on concrete. It is applied with a squeegee and squeezes out the excess glue, leaving a smooth surface that is easy to work with.
Pressure sensitive glues, on the other hand, are applied by hand and require the use of a pressure gauge to determine how much pressure is needed to get the glue to stick. Both types of adhesive work well on hard-to-reach areas, such as cracks and crevices, and on areas that are difficult or impossible to reach with other methods of bonding.
Can mold grow under vinyl flooring on concrete?
Water can enter the house through the cracks, grooves, and edges of vinyl plank flooring, even though it is known to be waterproof. In addition, vinyl is not a good insulator, which means that it will absorb moisture from the air and cause condensation to form on the surface of the vinyl. This can lead to mold and mildew growth, as well as damage to the interior of your home.
Do you need a vapor barrier on concrete?
You’ll typically need a vapor barrier if you’re installing flooring over concrete. In a low-humidity area, such as a basement or crawl space, it will be more difficult for the water to penetrate.
If you don’t have a moisture barrier in place, you’ll need to make sure that you have adequate ventilation to keep moisture out of your home. If you live in an area with a lot of humidity, it’s a good idea to install an air conditioner to help keep the humidity in check.
Do you need a subfloor on concrete?
While a subfloor is not necessary to add structural strength when you’ll be laying finish flooring on top of a concrete slab in a basement, subflooring over concrete offers two advantages. First, it’s easier to install. You don’t have to drill a hole in the slab and then drill through the concrete, as you would with a conventional concrete floor.
Second, you can add a layer of concrete to the floor without having to remove the entire slab. This is especially useful if you’re installing a new floor in an existing home. The most common type of underlayments used on concrete floors are called “slab” or “concrete slab” underlays.
These are designed to be installed over the existing concrete slabs, and are typically made of polyurethane (PU) or polyethylene (PE) foam. They can be used in conjunction with other materials, such as vinyl siding, to provide additional strength and durability to your finished floors.
What happens if you don’t put underlayment under vinyl plank flooring?
The product is softer than the plank and requires hard, thin underlay. Putting a soft product under vinyl plank will result in an unstable floor that is much more inclined to being damaged and/or falling apart.
If you are going to use a vinyl flooring product, make sure that it is a product that has been tested and approved by the U.S. Consumer Product Safety Commission (CPSC). CPSC is the federal agency responsible for regulating the safety of consumer products.
It is also the agency that regulates the manufacture and sale of vinyl products in the United States.
Is waterproofing required under vinyl flooring?
The presence and build-up of water under the vinyl is one of the reasons that we are required to waterproof beneath vinyl. This moisture builds up on the surface and causes the adhesive to fail. Waterproofing under vinyl can be done in a number of ways.
The most common method is to apply a thin layer of polyurethane (PU) or polyethylene (PE) to the underside of a vinyl surface. It is important to note that this type of waterproofing is not recommended for use on vinyl surfaces that have been exposed to water for an extended period of time (e.g. vinyl flooring).
The reason for this is that the PU or PE will absorb moisture from the surrounding environment and will not be able to hold onto the moisture that has built up underneath it. In addition, it is possible for moisture to seep into the plastic and cause it to deteriorate over time.
Do you need a pad under vinyl plank?
The only time we suggest underlayment under vinyl tile or plank flooring is if want to reduce the impact sound or sound transmission in your room. The noise and vibration can be reduced with the additional underlayment under the floor.
