How To Know What Size File To Use On Chainsaw? Easy Read!

how to know what size file to use on chainsaw

The right size for a file should be with file sides just over double the length of the tooth face you will be filing. It is possible to reduce the number of files by about two or three per tooth.

If you are filing your teeth with a toothpick, be sure to use the correct size. If you use a dental pick, make sure it is not too big or too small, and that it does not leave a mark on the teeth.

Everything is explained in that video:

What size file do I need for a 3/8 low profile chain?

It’s important to use the correct size file. The low profile chains need a 5/32” file. If you are unsure of the size of your chain, you can measure it with a tape measure or a ruler. If the chain is too long, cut it down to the proper size.

How do I know what size chainsaw chain I have?

If you want to get the correct size, you need to count 3 rivets on the chain and measure the distance between them from the centre points. Three rivets that measure 12 an inch across divided by two will give you a pitch of 1.5 inches.

If you are unsure of the size of your chain, you can measure it with a tape measure. If it is too big, cut it in half and re-measure.

What is the difference between .325 and 3/8 chain?

The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It requires more power to get the job done because it has bigger teeth and a heavier chain.

If you’re looking for a saw that can handle a lot of power, look no further than the 3/4-inch chain saws. These chains are designed to handle up to 1,000 pounds of weight, and they’re designed for heavy-duty use.

They’re also very durable, making them a great choice for use in a variety of applications.

What is chainsaw pitch?

The distance between any three consecutive rivets divided by two is known as the chain pitch. The most popular pitch for the Oregon chain is 1-1/2″, which has been the standard for many years.

What does 90 mean on chainsaw chain?

barrel. The “low profile” pitch refers to the angle between the bore and the front sight base, and is measured from the muzzle to a point just behind the rear sight post. This angle is usually measured in degrees, but can be measured as a fraction of a degree.

For example, if a rifle has a bore angle of 45 degrees and a high profile of.040, then the rifle is said to have a “high profile”. A rifle with a low-profile barrel will have an angle that is equal to or slightly less than the 45-degree angle.

A high pitch barrel is one that has an angled bore, so that the high-pitch bore is at a slightly higher angle than a normal bore.

Can I use any chain for my chainsaw?

No, chainsaw blades are not universal, not every bar and chain will fit on your machine. The correct specification is needed for the chainsaw chains to fit on your bar. It will not fit if you have a chain that is too long or narrow.

Rate this post
You May Also Like