total sq. footage x 1.5 equals total wattage needed. Rated 5 out of 5 by HomeDepotCustomer from This is a great product. It is easy to install and works great. The only problem I have with it is that it does not come with a mounting bracket.
I had to drill a hole in the wall to mount it to the ceiling. If you are looking for an easy way to light your home, this is the product for you.
Table of Contents
What is the rule of thumb for recessed lighting?
The rule of thumb is to divide the distance between the ceiling and the surface by two. The lights in the eight-foot ceiling should be four feet apart. If you have a ceiling that is eight feet high, you can use the table below to determine how much space you need for your lights.
If your ceiling is less than 8 feet, then you don’t need to worry too much about the spacing of your fixtures, as long as they are spaced at least four inches apart from each other. You can also use this table to figure out the number of fixtures you will need if you want to install more than one light in your space.
How far apart do you space 6 inch recessed lights?
The lights that are four inches in diameter should be placed four feet apart. The six-inch lights should be placed six inches apart. If you are using a dimmer switch, be sure to turn it off before you turn on the light. If you do not turn off the switch before turning on your light, you will not be able to adjust the brightness of your lights.
How do you stagger recessed lighting?
The typical rule is to place the lights the same number of feet apart as the bulb’s diameter in inches. A bulb with a 4-inch diameter should be at least 4 feet away from a 5-foot bulb. If you’re not sure, you can measure the distance between the two bulbs.
If you have a measuring tape handy, use it to measure from one bulb to the other. You can also use a ruler to make sure the bulbs are the right distance apart.
How many can lights for a 12×12 room?
The rule-of-thumb is 3-6 feet from each wall and between cans. You’d want two rows of lights in a room that’s 12 feet tall. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights.
It depends on the size of the room and the type of bulb you want to use. For example, if you are installing a light bulb in the living room, it will cost about $10.00 to install. If you’re installing it in your bedroom, the cost will be closer to $20-$30. You’ll need to find the right size bulb for your room.
In my case, I wanted a 6-watt bulb, so I went to Home Depot and picked up a 2-1/2″ diameter bulb. The bulb cost me $2.50, which is less than half of what it would have cost to buy the same bulb at a hardware store.
How many can lights in a 20×20 room?
If you have a center light fixture, you should be able to use 4 inch line voltage cans or low voltage for supplemental lighting. For a total of 24 lights, i would need at least 8 three inch cans. I would also recommend that you use a 12 volt DC power supply for the lights, as they will draw a lot of power from the wall.
If you are using a power strip, make sure that it is rated at 12 volts or higher. This will allow you to run your lights at a lower wattage than you would normally run them at, which will save you money in the long run.
How many recessed lights do I need for a 10×10 room?
You can measure your room to see how much you need. A rule of thumb is that you use one light for every 4 to 6 square feet of space. If you have a large room, you may need more than one.
If you don’t have enough space for all of your fixtures, consider installing a wall-mounted fixture. This will allow you to place the fixture in a location that is convenient for you and your guests.
Should recessed lights be wired in series or parallel?
Wiring in series reduces the voltage of each light. If you have four lights that are rated for 12 volts, they will need to be wired in parallel to receive the full 12 volts. If you have four lights that are rated for 3 volts, you can wire them in series and connect them to a 3-volt battery.
If you are wiring in multiple lights, it is important to make sure that all of the lights are wired to the same voltage. If one light is rated at 3.3 volts and the other at 4.2 volts (or vice versa), you will not be able to use them together.
How do you coordinate lights in an open floor plan?
It is possible to achieve a cohesive look by selecting lighting finished in the same, or closely related, finishes as the kitchen faucets and appliances. Try a mixed-metal light fixture that adds personality and interest to the space, or stick with a limited color scheme to keep the décor fresh.
How far off the wall should recessed lights be?
The rule of thumb is to place your light fixture between 1.5 feet and 3 feet from the wall if you intend to illuminate an entire wall. The fixture should be placed closer to the wall if they are fixed.
If your fixture is not attached to a wall, you will need to make sure that it is at least 2 feet away from any wall edges or corners. This will ensure that the light does not reflect off of the walls and into your living space.
How far apart should 4 recessed lights be?
Divide the height of the ceiling by two if you don’t know how far apart your lights are. As a baseline, for an 8 foot ceiling, you should space your recessed lights approximately 4 feet apart. If the ceiling is 10 feet, you should put 5 feet of space in between the lights. Now that you have a general idea of how much space you need, it’s time to figure out how to get it.
The easiest way to do this is to take a piece of paper and draw a line down the middle of your ceiling. This will give you the distance between your lights and the line you drew on the paper. You can also use a ruler to measure this distance, but I find it easier to just use my fingers. Once you’ve got your distance down, draw another line on top of it, and repeat the process for the other side.
When you’re done, the lines should look something like this: This is a good starting point. Now you just need to decide how many lights you want in your space.
