Plumbing lines should be about 2 feet underground to protect them from soil slippage. If your pipes are deeper than this, you may want to dig them up and replace them with a new line. The best way to install a pool pump is to have it installed by a licensed plumber.
This will ensure that the pump will work properly and that you will not have to pay for a professional to do it for you. It is also important to note that pool pumps are not designed to be installed in a basement or crawl space. They are designed for use in basements and crawl spaces.
Table of Contents
How many returns should a pool have?
Many professionals install two returns, but some prefer to use a general rule. A lot of the time, guy wood will place four returns in pools that measure 250 to 600 square feet. If you have a large pool, you may want to consider adding a second return to the bottom of the pool.
This is especially true if you are installing a new pool or are replacing a pool that has been in use for a long period of time. In this case, it may be a good idea to add a third return.
What type of pipe is used for swimming pools?
A standard for swimming pool piping, as well as many other plumbing jobs, is the rigid polyvinylchloride pipe. This means that it is 1/4 inch thick.
How long do underground pool pipes last?
A lifespan of over 75 years is possible with a highly durable rigid pipe. PVC pipes are available in a wide variety of sizes, shapes and colors. Rigid pipe can be cut to any length, but it is recommended that you choose a pipe that is at least 3 feet long. If you are unsure of the length of your pipe, you can measure it with a tape measure or a yardstick.
What is a pool return line?
Water is carried to the pump by the main drain and skimmers. The return lines are drawn. These pipes take water that has been filtered, and in some cases heated or chemically treated, and pushes it back into the pool.
The return lines push the water back up the main drain by using inlets or jets around the top of the pool. Stainless steel pipes are more durable than PVC pipes and can be used for longer periods of time. They are also less likely to corrode over time, making them a good choice for long-term use.
What direction should pool returns face?
It’s a good idea to point your return jets in a different direction to circulate the water in your pool. If your pool only has one jet, point the jet toward the skimmer and downward. The water at the bottom of the pool will be pushed to the top by this. If you have two or more jets, you can point them in different directions.
For example, if you’re using two skimmers and one of them has a jet that’s pointing downward, use that jet to push water upward. You can also use two jets to circulate water around the perimeter of a pool, as long as they’re pointing in the same direction.
Where should my pool jets point?
The jets should all point in the same direction, ideally at a 45-degree angle that’s directed toward the bottom of the pool. One way to remember is to point the jets at 4 o’clock or 7 o’clock and make sure they don’t push against each other.
If you don’t have a pool, you can also use this trick to make your pool look more realistic. Just make sure that you’re not trying to replicate the look of a real pool with the jetting.
Does a pool need a bottom drain?
Main drains are not required in an inground swimming pool, however they are strongly recommended and can be extremely useful in some circumstances. The main drain gives you the ability to drain the water from your pool without the use of a pump.
If you have a pool that has been sitting in the sun for a long time and needs to be drained, or if you want to replace your pool with a new one, this is useful. The main drain can also be used as a drain for an outdoor pool.
A good way to do this is to install an air-conditioning unit, which will help to keep the temperature of the air inside the house as low as possible.
