For a narrow hem, I start by sewing from the edge of the garment. The pattern requires you to sew from the edge, which is different from the method. It is a straight stitch, all the way around the hem. The hem needs to be pressed under.
For a 3/4″ wide hem (the one you’re going to be sewing on), you’ll need to do the same thing, but this time, instead of pressing under, you want to fold the fabric in half lengthwise. This will make it easier for you to sew the two halves together, and it will also give you a little more room to work with in the seam allowance.
You can do this with a seam ripper, if you don’t have one, or you can use a sewing machine. If you have a machine, it’s a good idea to make sure that the machine is set to the right size for your fabric, so that you won’t end up with an uneven hem when you try to hem it.
I like to use my machine for this step, because it makes it so much easier to get it right the first time.
Table of Contents
What does it mean to narrow hem?
When a pattern asks for a narrow hem, they usually mean a 1/2 inch hem folded in half that results in a 1/2 inch hem/fold. If you want to make the hem a little wider, you’ll need to add a few inches to the length of the pattern.
For example, if you’re making a dress with a hem that’s 1 inch wide and you’d like it to be 2 inches wide, then you would sew a 3/8 inch seam on the back of your dress. This will result in the dress being 1.5 inches wider than it would otherwise be.
Is a narrow hem the same as a rolled hem?
Medium- heavy weight fabrics tend to resist rolling, so the narrow hem is a good choice. This hem is typically slightly wider than the rolled hem due to the fact that the fabric isn’t being rolled, but it is narrower than a straight hem. This is the most common hem, and it’s the one you’ll see most often. It’s also the easiest to make.
You’ll need to cut a piece of fabric that’s about the same width as the hem you’re going to use, then fold it in half lengthwise. Then, fold the folded edge over and pin it into place. Repeat this process for the other side of your fabric, making sure to pin the fold in place on both sides as well.
The end result should look something like this: Now that you’ve got your hem pinned, you can start sewing. I like to start with the back of my fabric and work my way towards the front. If you don’t have a sewing machine, I’d recommend getting one as soon as possible. Sewing with a machine is much easier and faster than using a hand-sewing machine.
What tension should I use for thin fabric?
If you’re sewing lightweight fabrics, you should try a stitch length between 1.5 and 2 inches. If your fabric is heavier than that, you may need to go up a needle size or two to get the right amount of stretch. If you have a lot of fabric to work with, it’s a good idea to start with a smaller needle and work your way up to a larger one.
How do you stabilize thin fabric?
If you’re having trouble cutting delicate fabrics because they slip right out of the fabric sheers, place tissue paper under the fabric and pin them together before you cut. This will allow you to maintain an accurate cut.
What is a scallop hem?
The areas of the scallops that are longer than the rest will make the skirt appear shorter. If you want to make your skirt appear longer, you can use the following technique. First, cut a piece of fabric that is about the same length as the length of your waist.
Fold the fabric in half lengthwise and pin it in place. Then, sew the two pieces together at the top and bottom. This will create the illusion of longer legs.
What is a lettuce edge hem?
The lettuce hem is named for its resemblance to a lettuce leaf. The hem gets its characteristic waves from a zig-zag overlock stitching pattern, which emphasized rather than concealed hems.
