A more advanced version of the standard passive line out conversion is called an Active Line Out Converter. These require 12v power to output a signal. High powered systems will be able to handle a lot more power due to the fact that the converters handle up to 400 watt per channel. Amplifiers are the most common type of power amplifier used in home theater systems.
Power amplifiers can be either passive or active. Passive power amps are designed to provide power only to the speakers in the system. Active power amp’s are more powerful than passive ones and can handle much higher power levels. They are also more expensive to purchase and install.
Table of Contents
How do I tap my rear speakers into subs?
Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, you should use speaker wire. If it doesn’t have high level inputs, you can use a basic line out conversion that ties into the speaker wires and outputs the signal to your amplifier.
The first is to go to a used car lot and find a car that has an aftermarket sub. You can also find used subs for sale on Craigslist, eBay, and other online classifieds sites. These are usually pretty cheap, but you’ll have to do some research to find the right one for your budget.
Pioneer makes a line of high-end subs that are very popular with audiophiles. They are known for their excellent sound quality and the fact that they are made in the USA.
Are line out converter any good?
A line output converter is a great solution if your stereo doesn’t have enough of the things. You connect the stereo’s speaker wires to the LOC’s inputs and useRCA cables to send the signal from the LOC to your amplifier.
If you don’t want to use a converter, you can use an audio cable to connect your speakers directly to a LOC. LOC will then send the audio signal through the cable and into your amplifier.
What is the line out for on an amp?
The jack on the back of the amplifier is an output. The line out jack is used when the signal is traveling out of your amplifier to another destination, such as a PA system. If you have an amp that has an output jack, you can use that jack to route your signal out to another source.
For example, if you’re using an amplifier with an input jack and you want to use the output of that amp as your source for your guitar signal, then you could route that signal from the amp’s output to the guitar’s input. If you don’t have a jack for that output, it’s not a problem–you can just route it to a different source (such as another guitar amp).
What does loc mean on car radio?
This is a handy little gizmo that will allow you to tap into your speaker wires to grab a signal and then will choke it down to be able to be used as a line input or output. If you don’t have one of these, you can always use an audio cable to connect your speakers to your computer.
If you’re using a computer with a built-in headphone jack, it’s a good idea to use a cable that has a 3.5mm jack on one end and a 1/4″ plug on the other end. This will give you the ability to plug your headphones directly into the computer without the need for a separate cable.
Can you hook up subs to a factory amp?
So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good. If you would like to know more about how to get a killer system set-up in your car without changing your stereo, give us a call.
What does a high to low converter do?
The adapter converts high-level signal from the radio’s speaker line and transforms it into a safer low-level audio signal. You can add a 4-channel amplifier to your system for higher power output and better sound quality.
What are the RCA jacks on the back of my car stereo for?
If you have that option, you should use the line-level connections if you want to connect a signal to your amplifier. The rear of the Pioneer head unit has RCA jacks on it. If you want to do that, this is the best way to connect your amplifier’s signal inputs.
If you don’t have the option of connecting your signal from the front of the amp to the back, you’ll need to use the line level connections. The Pioneer AVH-X3700BHS has three rear-panel 3.5mm stereo minijack outputs (Front, Rear, and Sub).
Rear/Subwoofer outputs can be set to provide full range output with full fading capability, or they can provide non-fading outputs with low pass filter (normal/reverse) output.
Is audio out the same as line out?
The line out jack is on computer sound cards and is referred to as audio out and sound out. It allows external speakers, headphones, or other output devices to connect to the computer, transferring computer generated audio to the devices so that they can be heard by the user.
The line in jack can also be used as an input jack, allowing you to plug in a keyboard, mouse, gamepad, etc. to your computer. This is useful if you want to play a game on your PC, but you don’t have a mouse or keyboard to use it with.
You can then use your mouse and keyboard as input devices, and the game will work just as it would on a console.
