IC rated fixtures are safer and more energy efficient. How do you know if your recessed lighting is IC rated? It is inside the recessed lighting fixture on the Underwriters Laboratory sticker. You will need to contact the manufacturer of the fixture and ask them to send you a copy of their label. You can also call your local Home Depot or Lowe’s to see if they carry it.
Table of Contents
What does IC mean for recessed lighting?
Ic is an acronym for insulation contact. IC rating is a measurement to determine if it is safe to come in contact with insulation or not. Most of the inhabitants of a home are protected from the sun’s rays by a layer of insulation in the ceilings and walls.
In this case, the use of an IC rated light is recommended. IC ratings are based on a number of factors, such as the type of light and the distance it can be seen. This is why it’s so important to choose the right light for your home.
Do I need IC rated recessed lights?
IC-rated fixtures are best for spaces that offer direct contact with the insulation (usually in attic space). This is not true for non-ic-rated light fixture. It becomes a fire hazard when non-ic-rated lighting comes in direct contact with insulation materials. The answer depends on the size of the space and the type of lighting you want to use.
For example, if you’re installing a ceiling light in a small space, you’ll need to consider how much space you have to work with. If your space is relatively small, then you can install the fixture without worrying too much about the potential for fire. On the other hand, a larger space may require you to be more careful about how you install your light.
Is IC rated the same as fire rated?
IC-rated lights are constructed to avoid starting fires, “fire rated” lights and covers serve as a fire barrier in the event a fire has already started. The fire rating of the light will be maintained with the Tenmat Fire Rated Light Covers.
What is the difference between IC and non IC recessed lights?
The proper housing for lights with blown in insulation is provided by IC rated lights. IC rated fixture is built with a single can or housing and holes in it for air flow. These lights are great for areas that don’t have a lot of insulation.
Rated 5 out of 5 by HomeDepotCustomer from This is a great light for the price. It is very bright and easy to use. I would recommend this light to anyone who is looking for a light that will last a long time.
Are all LED recessed lighting IC rated?
Even though they run cooler than other lightbulbs, LED recessed lights do still need to be IC rated. While the amount of heat produced by LEDs is less than those produced by incandescents, they still produce a lot of heat. This heat can cause the bulb to overheat and burn out, which is why it’s important to make sure your LED lights are IC-rated.
Can IC recessed lights touch wood?
IC-rated recessed light clearance distances An IC-rated recessed light can be covered by insulation and can be within 1/2″ of (or perhaps touch) other combustible materiasl (such as the wood material of the firebox or the metal of a fire extinguisher) without causing a hazard to the occupants.
A fire-retardant material is not required to be installed in the interior of an enclosed space if the space is equipped with an automatic sprinkler system that is capable of automatically controlling the flow of water from the sprinklers to extinguish any fire that may occur in that space.
If an interior fire alarm system is installed, the system must be designed to provide for the automatic activation and deactivation of that system at any time that an emergency situation exists. The system may be activated or deactivated in response to an alarm signal from an external source, such as a smoke detector or an audible alarm, or by the presence of smoke or flames in a room or other enclosed area.
If the alarm is activated by a source other than an internal source (e.g., smoke detectors or audible alarms), it must have a means of deactivating that source at the same time as activating the internal alarm.
