Prefinished hardwood flooring has been finished – sanded, stained, and coated with polyurethane — in a factory. All you have to do is cut and nail it to the floor. Before it can be painted, unfinished flooring needs to be installed and sanded and refinished.
Table of Contents
Is prefinished hardwood flooring good?
The good looks of pre finished flooring can be maintained for as long as 25 years without cracking or dulling. The best way to protect your floors is to keep them clean, dry, and free of dust and grime.
Do prefinished hardwood floors scratch easily?
The durable finish on pre-finished flooring means that it’s often easier to maintain your floors as they’ll be better able to withstand stains, scratches, and water damage.
Is prefinished hardwood the same as engineered?
The finish of the wood isn’t referred to as engineered hardwood because it doesn’t refer to the process of actually creating the hardwood plank from different plies of wood. It is possible to pre finish or site finish engineered hardwood. Most engineered hardwood is finished with a varnish or lacquer.
The term “engineered wood” was first used in the mid-1800s to describe wood that had been treated with chemicals to make it more resistant to rot and decay. In the early 1900s, the term was extended to include all types of engineered wood, including hardwoods such as mahogany, walnut, and maple, as well as softwoods like poplar and pine.
The term is still used today, although it is more commonly applied to engineered woods that have been chemically treated.
Can you mop prefinished hardwood floors?
If you sweep, use a broom with soft bristles to avoid scratching, because microfiber mops work best for prefinished hardwood. Clean the surface with a soft, damp cloth. Rinse the mop thoroughly with water. Wipe off the excess water with the cloth and let it dry completely. Apply a thin coat of wax to the entire surface. Let the wax dry for at least 24 hours.
Repeat steps 1-6 until all wax has been applied. Use a clean, dry cloth to wipe off any excess wax. If you are using a brush, use it only to remove any wax that may have been left on the brush. When wax is completely dry, apply a second coat.
Can you sand prefinished floors?
Pre-finished hardwoods can be sanded and refinished. It’s something we do all the time. If you want, that bevel can be sanded flat. If you have a hardwood floor that needs to be painted, we can do that for you! We can paint your floor in a variety of colors and patterns. You can choose to have the paint applied to the entire floor, or just the areas you want painted.
What is the difference between prefinished hardwood and unfinished?
Prefinished floors are finished before installation, while unfinished floors must be finished after installation. If you’re looking for a pre-finished floor, you’ll want to look for one that has been professionally finished.
This means that the floor is finished to a high level of quality, and that it’s not just a piece of plywood that’s been glued together. The finished floor will have a smooth finish, with no sharp edges or imperfections.
It will also be more durable than unfinished flooring, as it will be able to stand up to the rigors of daily use.
Should I seal prefinished hardwood floors?
One advantage is the hard, durable finish. Several coats of sealant make these floors harder and more resilient to scratches, according to SFGate. When an unfinished floor is laid, usually just two or three coats of sealer are applied. Another advantage of hardwoods is that they are more resistant to rot and decay than other types of flooring.
This is especially true if the wood is untreated, which is often the case with unfinished floors. In fact, a study by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) found that untreated wood floors are twice as likely to decay as those that have been treated with sealants.
Another study, conducted by a team of researchers at the University of Illinois at Urbana-Champaign, found the same thing.
