The blue smoke indicates that the engine is overheating. Red smoke means the chain saw is on fire. If you see any of these colours, it’s time to call the fire department. You can also try to extinguish them with water, but that’s not always an option. In some cases, you might have to use a hose to try and put out the blaze.
Table of Contents
Should a chainsaw smoke when cutting?
It isn’t normal for a chainsaw to smoke, but it can be the result of overheating, the fuel mix containing too much oil, or the chain either not being sharp enough or not getting enough lubrication. Smoking a chainsaw is a sure sign that something isn’t right.
Will a dull chainsaw chain smoke?
Not only will a blunt chain cause smoke on dry wood it can also cause steam when cutting wet wood in cold conditions. If you want to prevent your chain from rusting, make sure you sharpen it after every tank of gas.
How tight should my chainsaw chain be?
You can’t pull the drive chain out of the sprocket of a properly-tensioned chainsaw chain if the chain is loose on the chainsaw guide bar. If you have a chain that is too loose or too tight, you’ll need to adjust the tension on your chain. You can do this by tightening or loosening the bolts that hold the guide bars in place.
How long should a chainsaw chain last?
The lifetime of a chainsaw chain is dependent on usage and maintenance. The chain should last many years; 5-6 years should be no problem. The chainsaw chain can last up to 10 years if it is properly cared for.
How often do you need to sharpen a chainsaw?
A chainsaw can only be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened at least once a month. A chainsaw blade will retain its sharpness for about three hours of work. How to sharpen a Chainsaw Bladesaw blades are made up of a number of different parts.
The most important of these are the blades themselves, which can be made from a variety of materials, such as steel, aluminum, titanium, and carbon fiber. Blades also come in a wide range of shapes and sizes, so it’s important to choose the right one for the job at hand. Both types are designed to cut through wood and other hard materials.
How do I know when my chainsaw bar is worn out?
You are in good shape if that is the case. Pressing your straight edge against that outside tooth causes the tooth to shift over. That allows your straight edge to lay flat against the bar. You can buy new chainsaws from your local hardware store for around $100.
If you want to go the extra mile and buy a brand new chain saw, that’ll run you about $1,000. It’s a lot of money, but you’ll be glad you did.
Can you burn up a chainsaw chain?
When it’s hot, don’t refill your chain saw. You’re too impatient to wait for it to cool off, so why burn up a perfectly good chain saw?. The heat from a hot engine causes the fuel to evaporate as you pour it into the engine, and that causes the chainsaw to get overheated.
The best way to prevent this is to keep the chain in a cool, dry place, away from the heat source. If you can’t do that, you’ll need to use a fan to blow cool air over the blade.
How do I know if my chainsaw is dull?
When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands. When your chain is oiled and the chain tension is correct, the saw is making smoke. An even cut can be produced by the chainsaw.
It’s possible that your chain has dull cutting teeth on one side and a sharp cutting tooth on the other side. If you have a chain that is dull, you may want to replace it with a new one. You can do this by removing the dull teeth and replacing them with sharp teeth. If you don’t know what to do, ask a professional.
