You’ll need 1.5 yards of fabric with 42 inches of width to make a quilt of 36” x 50” It will cost you up to 3.5 yards of fabric if you pick a quilt size larger than 42 inches. The width of the quilt is the only thing that stands between you and quilted objects. Measure the width of the fabric you want to use.
You can use a ruler or a tape measure to measure your fabric width, or you can measure it yourself with a measuring tape. I prefer the latter, as it’s much easier to keep track of how much fabric I have to work with, and it also gives me a good idea of where I’m going to end up when I finish the project. Once you’ve got your measurement, cut out the desired number of squares.
For this project, I’ll be using 36 squares, but you could use any number you’d like, depending on the size of your project and how many squares you plan on using. It’s also important to note that you don’t need to cut all the squares in the same size, just the ones that are closest to your desired size.
Table of Contents
How many yards of backing do I need for a full size quilt?
The horizontal seam is the most efficient use of the fabric. You will need 7 yards of backing fabric. If you want to make a smaller blanket, you can use the same amount of fabric as you would for a larger one.
For example, if you are making a blanket that will fit in the trunk of a car, then you could use 8 1/2 yards for the backing. If you were making the blanket to be used as a bedspread or a pillowcase, it would be a good idea to use more than 8 yards.
How much fabric is needed for a rag quilt?
You can use fabric from your stash, or you can use 3 3/8 yards of fabric for backing. 1/2 yard of embroidery floss. I used a ribbon I had laying around the house, but you could use any ribbon you have lying around.
If you don’t have ribbon, you will need to cut the ribbon to the size you want it to be, and then sew it onto the back of the quilt. You will also need a quilting needle and thread. Sewing the Backing Fabric to The Back of The Quilt (optional but recommended) You are going to sew the fabric to your backing.
This is a very important step, as it will allow you to easily remove the backing later on. The fabric you are sewing to should be the same color as your fabric backing, so that you won’t be able to tell the difference between the two.
How much larger should batting be than quilt top?
To make sure you have wiggle room, you want your batting to be 2” bigger all around. If you add 4” to the width and 4” to the length of the pieced top, you can determine the size of your wiggle room.
For example, if you are using a 12″ piecing top and your batter is 1.5″ thick, then you would need to add 3/4″ to your top width to get the same width as the batter. If you were to use a 9″ top, your width would be 4″, so you’d need 4/8″ of extra width on the top.
This is why it’s important to make sure you’re using the right size batter for your project.
How many yards of fabric do I need for a queen size quilt top?
A standard queen size quilt that is 88 inches wide and 96 inches long takes about 8 yards of fabric for the front of the quilt and another 8 yards of fabric for the back of the blanket.
If you want to make your own quilts, you’ll need a quilting machine. You can buy one online or at your local fabric store. If you don’t have one, a sewing machine is a great way to learn how to sew.
How much bigger should the backing be than the quilt top?
The size of the back must be at least six inches wider than the quilt top. A total of 12″ larger than your quilt top. If you want your backing to be straight and square, trim the top and bottom edges. Your backing should be pressed. Cut your fabric. You can use any fabric you like, but I like to use a 100% cotton/polyester blend for my quilts.
I cut my fabric in two pieces, one for the front and one to be sewn on the sides. The front piece will be the bottom edge of my backing, and the side piece is where I will sew the edges together.
If you don’t have a fabric cutting machine, you can cut out a piece of fabric that is about the same size as the backing you are using, then cut it in half and sew it together with a 1/4″ seam allowance. This will make it easier to sew. Cut the fabric to the size you want your back to look like.
How many fat quarters do I need to make a quilt?
The fat quarter is piling up. 12 fat quarters are all you need to make a great lap quilt. You can buy them at any big box store, or you can make your own at home. Cut the Fat Quarters into 1/2 inch squares.
I cut mine in half, but you could cut them in quarters as well if you want to make it a little easier on yourself. If you don’t have a cutting board, use a pizza cutter to cut the squares into quarters, and then cut each quarter into a half inch square.
This will give you a total of 12 quarters to work with, which is a lot of quilts for one person to carry around. You can also use the fat quarter squares as a template for cutting out your quilting squares, so you won’t need to worry about cutting them all at once.
It’s also a good idea to mark your squares with a Sharpie so that you know exactly where you are going to start cutting. Once you have all your quarters cut out, it’s time to sew them together. The easiest way to do this is to use your sewing machine.
