The average cost to build a pool deck is around $5,000. A simple wood deck for an above-ground pool may only need a few square feet of decking, while a more complex deck may require more.
Table of Contents
Is it hard to build a pool deck?
It provides a place to swim, sunbathe, dine, or just visit. The trouble is that most pool decks are too difficult or complicated for the weekend carpenter to build. If you’re looking for a pool deck plan that’s easy to construct, this is the one for you. It’s based on a simple design that you can build in a few hours.
You’ll need a concrete mixer, a drill press, an electric drill and a hand drill. All you need to do is drill a hole in the bottom of the deck, fill it with concrete and then fill the hole with a layer of sand.
What is the cheapest way to build a deck?
untreated wood decks are generally the cheapest to install, but don’t forget long-term costs. If they don’t get the proper care, wood decks will degrade quickly.
How much is a 12×12 pool deck?
Adding a similar size room to your home will cost more than a deck. Depending on the size of the deck and the number of people living in the house, it can cost as little as 15 or as much as $85 a square foot.
If you are looking for a deck that is large enough to accommodate a family of four, you may want to look at a larger deck, such as a 16 x16 or a 20 x20. These larger decks are more expensive than the smaller decks.
However, if you have a large family, it may be worth the extra cost to add a bigger deck than a smaller one.
What is the best wood to use for a pool deck?
To repel water and keep it from entering the wood, you’ll need a good exterior wood such as redwood, teak, cedar, or ipe. If you don’t have any of these materials, you can still make your own water repellent.
You can use a spray bottle, but you’ll have to be careful not to spray too much of it on the surface of the tree. If you do, the water will evaporate, and you won’t be able to use it again for a long time.
What material do I need for a 12×12 deck?
You should purchase an additional 25 percent wood to allow for framing pieces to be added later. Cut the lumber to size. Use a jigsaw to cut out the pieces of lumber that will make up your joist and beam. Be sure to measure the length of each piece to make sure you have the right amount of wood for your project.
For example, if you are building a two-story house, you will want to use two 2x4s and two 1x6s. If you plan to add a second story later on, then you may need to purchase additional boards for the second and third stories.
How much does it cost to build a deck around an above ground pool?
An inexpensive above ground pool deck can cost as much as $2,000. Depending on the size and complexity of the deck, it can cost more. Below is a list of some of the most expensive decks on the market.
What is a floating deck?
A floating deck is a deck that isn’t attached to a building and they “float” above the ground. In general, floating decks are low to the ground and don’t require handrails or staircases. They are sometimes called “freestanding” decks because they are built just above the ground level.
How big should the gap be between a pool and a deck?
The maximum gap between the deck and the pool is usually 1/3 inch. Depending on the local codes, slip resistance, gaps between boards, and slope of the deck may be regulated. Whether in a residential or commercial setting, these design requirements should be considered for any deck adjacent to a swimming pool or hot tub. For more information, please contact your local building official.
