Installing a wood burner or multi-fuel stove is not something you should do yourself. An ill-fitting stove could cause it to become a fire risk, but it could also cause it to release lethal carbon monoxide into your home. If you do decide to go this route, it’s important to make sure that the stove you choose is safe for you and your family.
Table of Contents
Can I install a stove myself?
Basic tools and supplies are all that is needed to hook up a gas range. And if you use the right materials and follow instructions carefully, you can safely do the job yourself. It’s well worth the investment for a job like this to be done by a professional.
How hard is it to install a wood-burning fireplace?
Modern fireplaces – both wood-burning and gas-fueled – are much easier to install than building a traditional masonry unit. Fireplace inserts are easy to install because they’re pre-built from the factory and only need an opening to be drilled into the wall. In the case of a gas fireplace, you’ll need to drill a small hole in the bottom of the fireplace insert to allow the gas to flow through it.
This is done by drilling a 1/2-inch-diameter hole through the insert and then using a hole saw to cut out the hole. You can also use a drill press to do this, but it’s a bit more time-consuming. If you don’t have access to a drilling press, a hand drill is a good option. Once you’ve drilled your hole, simply screw it into place and you’re good to go.
Do I need a certificate to install a wood burner?
Simply ask for a copy of the certificate of compliance. This usually costs a small amount. The installation will be confirmed as compliant with this. If you are still not comfortable, you can contact a local HETAS installer.
Do I need to line chimney for wood burning stove?
A chimney liner is obligatory if you are installing a woodburning stove, gas fire or open fire in a new build property to comply with Document J of current Building Regulations. If the flue inside your chimney is no longer in good shape, you may need a chimney liner.
How far does wood stove need to be away from wall?
Dry wall covered with wood frame walls are considered to be a fire hazard. If no wall protection is used, the common radiant-type stove or heater needs to be at least 36 inches from the wall. (b) Fireplace. A fireplace shall be installed in accordance with the manufacturer’s installation instructions.
Fireplaces shall not be used for cooking or heating purposes unless the fireplace is equipped with an automatic fire-extinguishing system that is capable of extinguishing a fire in less than one minute. The fireplace shall have a capacity of not more than 10,000 cubic feet (3,500 cubic meters) of air per minute (cfm) and a minimum of one-half inch (1.6 cm) (12.7 millimeters) thick of drywall between the firebox and the floor.
In addition, fireplaces that are not required to be fireproof shall meet the requirements of the International Fire Code (IFC) or the National Fire Protection Association (NFPA) Standard on Fire-Resistance Ratings (SFR) for the area in which they are installed, whichever is applicable to the type of fireplace.
What do you put on the wall behind a wood stove?
A fireback is a cast iron object that can be placed behind a stove to help protect a wall. Firebacks can help to enhance the look of a room. Firebacks come in a variety of shapes and sizes. They can also be made of wood, metal, or plastic.
The most common types of firebacks used in the United States are the fire-retardant ones. These are designed to prevent fire from spreading to combustible materials such as wood or metal.
