If you have a nearby power source, you can easily install recessed lights by yourself. Bringing in a power source adds some time to the project, but can be accomplished by wiring your own power supply. . The first thing you’ll need to do is to install the lights.
You’ll want to make sure that you’re using the right type of lights for your project. For example, some lights are more efficient than others, which means that they’ll last longer. On the other hand, they’re also more expensive, so it’s a good idea to choose lights that will last for a long time.
Table of Contents
Do I need an electrician to install recessed lighting?
Installing recessed lighting can be challenging—you might want to hire an electrician to do the job. Installation of recessed lighting can be difficult if you’re not experienced in wiring light fixtures.
Can you put recessed lights in an existing ceiling?
Don’t worry, you do not have to. The main wire needs to be fed through the hole in the ceiling in order for the lights to work. If you have a ceiling that’s already been painted, you’ll need to do the same thing, but you won’t be able to use the existing paint. You’ll also want to make sure that the new ceiling is at least 1/2 inch higher than the old one.
Does recessed lighting add value to a house?
LED recessed lighting is particularly appealing to prospective buyers and, according to research by Vonn, could add anything between 1% and 3% to your home’s value – enough to make it worth the investment.
How much does it cost to install 8 recessed lights?
Installing recessed lighting costs $100 to $480 per light fixture, or around $360 each, depending on your ceiling material, housing type, and location.
How hard is it to DIY recessed lighting?
It is more difficult to install recessed lights than traditional types. It can be more difficult to put them in the ceiling than it is to work along the wall. Light in a Wall The first step is to cut out the holes in your ceiling. You can do this by using a utility knife, or you can use a Dremel tool.
Once you have cut the hole, you will need to drill a pilot hole for the light. This will allow you to attach the lights to the studs. If you do not have access to a drill press, then you may want to consider purchasing one from a local hardware store.
