You can definitely use speaker wire for 12v power. The wire gauge is the only factor that should be considered. Depending on the gauge you use, you can get a higher or a lower amperage, which will give you the electrical load that the speaker is rated to handle.
For example, if you have a speaker rated at 20 watts, and you want to run it at 12 volts, you will need a wire with a gauge of 20 gauge or higher. If you are using a 12 volt power supply, then you can use the same wire, but you’ll need to use a higher gauge wire.
You can find out how much current your speaker can handle by plugging it into a voltmeter and measuring the voltage on the back of the amp.
Table of Contents
Can I run electricity through speaker wire?
When wiring low current systems, like home security sensors, doorbells, landscape lighting, and thermostats, speaker wire can be used as electric wire. Speaker wires are graded the same way as electric wires, and are made of copper. The speaker wire is soldered directly to the speaker terminals of the amplifier. The speaker wires are not connected to any other components, such as amplifiers, speakers, or power supplies.
Can speaker wire be used for AC power?
Many people use cheap speaker wire for lamps in their living rooms, so it’ll work as a power cable. It is not worth the risk to play with fire.
What voltage can speaker wire handle?
Audio signals are transmitted in the form of electricity, but they are not very high-level. You do not get shocked by the speaker cable. You can only get shocked over 42V DC.
If you want to get a shock, you need to use a high-voltage power supply, such as a 12V or 24V AC supply. If you are using a battery-powered speaker, the voltage will be much higher, and you will not be able to hear the audio signal.
What is the difference between speaker wire and power wire?
The only difference is that speaker wire typically has clear outer insulation, while electrical wire might be black, brown, white or some other color. The wires are very much alike and can be used interchangeably. Speaker cables and electrical cables are the same thing, but they are different in many ways.
For example, speaker cables have an outer conductor that is insulated from the rest of the cable. Electrical cables, on the other hand, don’t have a conductor at all. They are made up of conductors that are connected to each other and to the outside world. This is why electrical wiring is often referred to as “wireless” wiring.
Can you use speaker wire as a ground?
Speaker wire won’t work as a ground wire because the gauge is too small. Unless, of course, you want to watch a fireworks show in your car. Oxygen-free wire is not important for speaker-wire. It is not relevant for power and ground wire.
If you want to use speaker wire for a power wire, make sure that the wire you are using is the same gauge as the speaker wires you will be connecting to the vehicle’s electrical system.
For example, if you have a 12-gauge wire and you intend to connect it to a speaker in the trunk of your car, then you should use a gauge of 12, not 12.5.
The reason is that 12 gauge wire has a much higher resistance than 12 gage wire does, so it will not be able to carry enough current to make a good connection between the two wires. If you use 12 gauges of wire in a trunk, it is not going to be long enough to reach all the way to your speakers.
Can I get shocked from speaker wire?
Speaker wires cannot shock you. The speaker wires do not have enough strength to cause an electric shock.
