It’s good news that shortening too-long jeans is the easiest alterations you can make to denim pants. A tailor or seamstress can shorten them, either by cutting off some fabric and redoing the hems or taking up the hems in a way that makes them shorter. Longer jeans can be hemmed, but it’s not as easy as it sounds. You’ll need to take the hem of the jeans and fold it in half.
Then, you’ll cut a piece of fabric that’s about the same length as the original hem and sew it into the fold. This will make the new hem shorter than the old one. It’s a bit of a pain, so don’t do it unless you really know what you’re doing. If you want to hem a long-sleeved pair of jeans, make sure you know how to do that before you start.
Table of Contents
What to do with jeans that are too long?
You can wash your jeans in hot water to trigger shrinkage. They should not be washed in hot water a single time. They should shrink slightly after you run them through your washing machine three or four times. If you want to shrink your jeans in a standard dryer, be careful not to let them get too hot, as this can cause them to shrink even more.
What stitch is used to hem jeans?
You can use a zig-zag stitch or a serger on the edges. The jeans need to be pinned with a 1/2 inch seam allowance. To sew all the way around the waistband, use a straight stitch. Back of the Jeans to each other.
You can sew the front and back separately, or sew them together. If you want, you can add a button to the back of your jeans to make them look a little more professional.
How much does it cost to hem jeans?
Some people prefer to use a professional to hem their pants. If you don’t have a tailor or seamstress on hand, you can still hem a pair of pants at home, but you’ll have to do it in a different way.
You’ll need to cut a piece of fabric that’s about the same length as your pant leg. Then, fold the folded fabric in half lengthwise and sew the two halves together. This will create a hem that is about 1/2 inch shorter than the pants leg, which is what you want.
Can I cut jeans that are too long?
If you like the raw hem look, you can easily cut off your jeans at home. You just need a pair of scissors and some patience. Cut off the bottom hem of the jeans. This is the part that’s going to get a lot of attention, but it’s actually pretty easy to do.
You’ll want to make sure that you cut all the way around the waistband, not just at the top.
How do I stop my jeans from curling when I hem them?
Lower heat settings can be used on automatic dryers. Don’t allow the fabrics to dry completely. It’s a good idea to remove clothes while still slightly damp to avoid over drying that can lead to curling. Allow laundry to air dry in a warm, dry place and skip the dryer completely.
How do you shorten the length of jeans?
If you want to create an equal fold on the other leg, you need to measure just below the preexisting hem. The hem should be pinned in place. Next, fold the cuff in half and pin it to the inside of the waistband. This will create a pocket for your phone, wallet, or whatever else you might want to keep in your pocket.
You can also use this pocket as a place to store your keys or other valuables. If you don’t have a key fob, you can make one out of a piece of paper or something similar. Make sure the pocket is large enough to hold the phone or wallet and that it doesn’t get in the way when you’re wearing your jeans.
Can you cut jeans with scissors to make them shorter?
Use fabric (or super sharp) scissors to cut the hem off your jeans. Follow your chalk mark when cutting so that you have a straight edge. It doesn’t have to be perfect, but you don’t want it to be unbalanced. Once you’ve cut your hem, it’s time to sew the jeans together. You can either use a straight stitch or a zig zag stitch, depending on your preference.
If you want to make it a little more decorative, you can also add a decorative hem stitch to the back of each leg. Just make sure that the stitches are not too close together, or you’ll end up with a seam that looks like it was made by a sewing machine.
